在Vagrant中安装CentOS 6.7上的nginx1.11.5 + Ruby2.3.3 + Rails5.0.0.1 + Passenger 5.0.30
机器环境和前提
机器
-
- OSX Yoshemite
ver 10.10.5
前提 – Chinese version of the word “premise”
-
- Railsの動作環境を作るぜ！
-
- mac上にvagrant環境が既にある
- vagrant上にCentOS6.7の環境が既にある
命令备忘录
群组列表
cat /etc/group
用户列表
cut -d : -f1 /etc/passwd
- bashrcなどにalias登録しておくと楽
alias listusers='cut -d : -f1 /etc/passwd'
nginx
Nginx (英文发音：engine X) 是一个高性能的HTTP和反向代理服务器。
添加Nginx用户
- グループ追加
sudo groupadd -g 600 nginx
- ユーザ追加
sudo useradd -g nginx -u 600 -s /sbin/nologin -d /home/nginx nginx
获取源代码
cd /usr/local/src/
sudo wget https://nginx.org/download/nginx-1.11.5.tar.gz
sudo tar zxvf nginx-1.11.5.tar.gz
/usr/local 以下は自分でアプリケーションをインストールする場所として利用する
/usr/local/src はソースコードの置き場所
解除依赖关系
在中国可以使用: 餐巿街
sudo yum -y install pcre-devel #正規表現ライブラリ
搭建
cd nginx-1.7.11
sudo ./configure --prefix=/usr/local/nginx --user=nginx --group=nginx --with-http_ssl_module
sudo make
sudo make install
設置執行檔
从以下链接中复制适合您环境的源代码：https://www.nginx.com/resources/wiki/start/topics/examples/initscripts/
sudo vi /etc/init.d/nginx
※コピーしてきたソースを貼る
sudo chmod 755 /etc/init.d/nginx
根据您的安装环境进行路径更改。
sudo vi /etc/init.d/nginx
nginx="/usr/sbin/nginx"
↓
nginx="/usr/local/nginx/sbin/nginx"
NGINX_CONF_FILE="/etc/nginx/nginx.conf"
↓
NGINX_CONF_FILE="/usr/local/nginx/conf/nginx.conf"
确认nginx是否已启动
日志设置
- 出力先ディレクトリ作成
sudo mkdir /var/log/nginx
sudo chmod 777 /var/log/nginx/
sudo chown nginx:nginx /var/log/nginx
- errorログの設定
sudo vi /usr/local/nginx/conf/nginx.conf
※errorログの出力を以下の設定に。
デバッグのためにnotice以上を出力する。
error_log /var/log/nginx/error.log notice;
安装端口扫描命令。
sudo yum install nmap
启动nginx
- 起動
sudo /etc/init.d/nginx start
[vagrant@localhost nginx]$ sudo /etc/init.d/nginx start
nginx を起動中: [ OK ]
[vagrant@localhost nginx]$
-
- ポートの確認
80番が開いているのでOK
nmap localhost
[vagrant@localhost nginx]$ nmap localhost
Starting Nmap 5.51 ( http://nmap.org ) at 2016-12-18 05:20 UTC
Nmap scan report for localhost (127.0.0.1)
Host is up (0.00016s latency).
Other addresses for localhost (not scanned): 127.0.0.1
Not shown: 996 closed ports
PORT STATE SERVICE
22/tcp open ssh
25/tcp open smtp
80/tcp open http
111/tcp open rpcbind
Nmap done: 1 IP address (1 host up) scanned in 0.07 seconds
[vagrant@localhost nginx]$
- ログの確認
cat /var/log/nginx/error.log
[vagrant@localhost nginx]$ cat /var/log/nginx/error.log
2016/12/18 05:16:58 [notice] 9946#0: using the "epoll" event method
2016/12/18 05:16:58 [notice] 9946#0: nginx/1.11.5
2016/12/18 05:16:58 [notice] 9946#0: built by gcc 4.4.7 20120313 (Red Hat 4.4.7-16) (GCC)
2016/12/18 05:16:58 [notice] 9946#0: OS: Linux 2.6.32-573.el6.x86_64
2016/12/18 05:16:58 [notice] 9946#0: getrlimit(RLIMIT_NOFILE): 1024:4096
2016/12/18 05:16:58 [notice] 9947#0: start worker processes
2016/12/18 05:16:58 [notice] 9947#0: start worker process 9949
[vagrant@localhost nginx]$
停止nginx。
- 停止
sudo /etc/init.d/nginx stop
[vagrant@localhost nginx]$ sudo /etc/init.d/nginx stop
nginx を停止中: [ OK ]
[vagrant@localhost nginx]$
-
- ポートの確認
80番が閉じているのでOK
nmap localhost
[vagrant@localhost nginx]$ nmap localhost
Starting Nmap 5.51 ( http://nmap.org ) at 2016-12-18 05:27 UTC
Nmap scan report for localhost (127.0.0.1)
Host is up (0.0052s latency).
Other addresses for localhost (not scanned): 127.0.0.1
Not shown: 997 closed ports
PORT STATE SERVICE
22/tcp open ssh
25/tcp open smtp
111/tcp open rpcbind
Nmap done: 1 IP address (1 host up) scanned in 0.07 seconds
[vagrant@localhost nginx]$
将路径添加到环境变量中。
暂时添加了
sudo vi /etc/profile
最終行に以下を追記
# user add
export PATH=$PATH:/usr/local/nginx/sbin/
请重新登录并确认。
[vagrant@localhost nginx]$ nginx -v
nginx version: nginx/1.11.5
[vagrant@localhost nginx]$
红宝石
前提 但一种选择即可
-
- rbenvを利用しない
ソースからインストール
本番環境を想定
本番環境のRubyのverを頻繁に変更することはない
なのでRuby2.3.3をピンポイントでインストールする
という設定で進める
删除centos默认安装的ruby。
sudo yum erase ruby.x86_64
解除依赖关系
一下子在Yum上解决了它。
-
- yum.confの編集
IPv6を無効にする
sudo vi /etc/yum.conf
以下を追記
# user add
ip_resolve=4
- yumのupdate&install
sudo yum -y install libyaml libyaml-devel zlib zlib-devel readline readline-devel openssl openssl-devel libxml2 libxml2-devel libxslt libxslt-devel libcurl-devel
sudo yum update libyaml libyaml-devel zlib zlib-devel readline readline-devel openssl openssl-devel libxml2 libxml2-devel libxslt libxslt-devel libcurl-devel
下载
cd /usr/local/src
sudo wget https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.3.tar.gz
sudo tar zxvf ruby-2.3.3.tar.gz
安装
cd ruby-2.3.3
sudo ./configure --prefix=/usr/local/ # オプションは必要があれば何か付与すること
sudo make
sudo make install
一気にやりたいならこれでもいいかも(未検証)
sudo ./configure --prefix=/usr/local/ && make && make install
确认 (què
ruby -v
[vagrant@localhost ruby-2.3.3]$ ruby -v
ruby 2.3.3p222 (2016-11-21 revision 56859) [x86_64-linux]
[vagrant@localhost ruby-2.3.3]$
which ruby
[vagrant@localhost ruby-2.3.3]$ which ruby
/usr/local/bin/ruby
[vagrant@localhost ruby-2.3.3]$
铁轨
可以使用Gem进行安装。
-
- gemコマンドをsudoできるようにする
/usr/local/bin/ 以下にあるコマンドは全てsudoできるようにしてしまう
sudo visudo
以下の記述を修正(nginxもついでに追加)
Defaults secure_path = /sbin:/bin:/usr/sbin:/usr/bin
↓
Defaults secure_path = /sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin/:/usr/local/nginx/sbin/
- インストール
sudo gem install rails -v 5.0.0.1
- 確認
rails -v
[vagrant@localhost ~]$ rails -v
Rails 5.0.0.1
[vagrant@localhost ~]$
乘客
安装
- gemでインストール
sudo gem install passenger -v '5.0.30'
- 確認
[vagrant@localhost ~]$ passenger -v
Phusion Passenger 5.0.30
[vagrant@localhost ~]$ which passenger
/usr/local/bin/passenger
[vagrant@localhost ~]$
安装nginx模块
sudo passenger-install-nginx-module
在一些地方被问到。
-
- 最初はpassengerサポートでnginxをコンパイルするか？なので 1
-
- 次は言語。 Ruby で
-
- nginxのソースコードの場所を聞かれるので /usr/local/src/nginx-1.11.5 で
-
- どこにインストールしたいか聞かれるので /usr/local/nginx で
-
- そのほかのconfigureオプションを聞かれるけどとりあえず無し。そのまま Enter 押下で
-
- 最後に、やっちまうぞ！？的な感じになるのでおとなしく yes で
- 無事に終わったら Enter で
[vagrant@localhost ~]$ sudo passenger-install-nginx-module
Welcome to the Phusion Passenger Nginx module installer, v5.0.30.
This installer will guide you through the entire installation process. It
shouldn't take more than 5 minutes in total.
Here's what you can expect from the installation process:
1. This installer will compile and install Nginx with Passenger support.
2. You'll learn how to configure Passenger in Nginx.
3. You'll learn how to deploy a Ruby on Rails application.
Don't worry if anything goes wrong. This installer will advise you on how to
solve any problems.
Press Enter to continue, or Ctrl-C to abort.
1
--------------------------------------------
Which languages are you interested in?
Use <space> to select.
If the menu doesn't display correctly, press '!'
‣ ⬢ Ruby
⬢ Python
⬡ Node.js
⬡ Meteor
--------------------------------------------
Checking for required software...
* Checking for C compiler...
Found: yes
Location: /usr/bin/cc
省略
--------------------------------------------
Automatically download and install Nginx?
Nginx doesn't support loadable modules such as some other web servers do,
so in order to install Nginx with Passenger support, it must be recompiled.
Do you want this installer to download, compile and install Nginx for you?
1. Yes: download, compile and install Nginx for me. (recommended)
The easiest way to get started. A stock Nginx 1.10.1 with Passenger
support, but with no other additional third party modules, will be
installed for you to a directory of your choice.
2. No: I want to customize my Nginx installation. (for advanced users)
Choose this if you want to compile Nginx with more third party modules
besides Passenger, or if you need to pass additional options to Nginx's
'configure' script. This installer will 1) ask you for the location of
the Nginx source code, 2) run the 'configure' script according to your
instructions, and 3) run 'make install'.
Whichever you choose, if you already have an existing Nginx configuration file,
then it will be preserved.
Enter your choice (1 or 2) or press Ctrl-C to abort: 2
--------------------------------------------
Where is your Nginx source code located?
Please specify the directory: /usr/local/src/nginx-1.11.5
--------------------------------------------
Where do you want to install Nginx to?
Please specify a prefix directory [/opt/nginx]: /usr/local/nginx
--------------------------------------------
Extra Nginx configure options
If you want to pass extra arguments to the Nginx 'configure' script, then
please specify them. If not, then specify nothing and press Enter.
If you specify nothing then the 'configure' script will be run as follows:
sh ./configure --prefix='/usr/local/nginx' --with-http_ssl_module --with-http_gzip_static_module --with-http_stub_status_module --with-cc-opt=-Wno-error --with-ld-opt='' --add-module='/usr/local/lib/ruby/gems/2.3.0/gems/passenger-5.0.30/src/nginx_module'
Extra arguments to pass to configure script:
--------------------------------------------
Confirm configure flags
The Nginx configure script will be run as follows:
sh ./configure --prefix='/usr/local/nginx' --with-http_ssl_module --with-http_gzip_static_module --with-http_stub_status_module --with-cc-opt=-Wno-error --with-ld-opt='' --add-module='/usr/local/lib/ruby/gems/2.3.0/gems/passenger-5.0.30/src/nginx_module'
Is this what you want? (yes/no) [default=yes]: yes
--------------------------------------------
Compiling Passenger support files...
# env NOEXEC_DISABLE=1 /usr/local/bin/ruby /usr/local/bin/rake nginx:clean nginx RELEASE=yes
省略
--------------------------------------------
Nginx with Passenger support was successfully installed.
Please edit your Nginx configuration file (probably /usr/local/nginx/conf/nginx.conf),
and set the passenger_root and passenger_ruby configuration options in the
'http' block, like this:
http {
...
passenger_root /usr/local/lib/ruby/gems/2.3.0/gems/passenger-5.0.30;
passenger_ruby /usr/local/bin/ruby;
...
}
After you (re)start Nginx, you are ready to deploy any number of web
applications on Nginx.
Press ENTER to continue.
--------------------------------------------
Deploying a web application
To learn how to deploy a web app on Passenger, please follow the deployment
guide:
https://www.phusionpassenger.com/library/deploy/nginx/deploy/
Enjoy Phusion Passenger, a product of Phusion (www.phusion.nl) :-)
https://www.phusionpassenger.com
Phusion Passenger is a registered trademark of Hongli Lai & Ninh Bui.
[vagrant@localhost ~]$
-
- 確認
–add-module にpassengerのモジュールが追加されている
nginx -V
[vagrant@localhost ~]$ nginx -V
nginx version: nginx/1.11.5
built by gcc 4.4.7 20120313 (Red Hat 4.4.7-16) (GCC)
built with OpenSSL 1.0.1e-fips 11 Feb 2013
TLS SNI support enabled
configure arguments: --prefix=/usr/local/nginx --with-http_ssl_module --with-http_gzip_static_module --with-http_stub_status_module --with-cc-opt=-Wno-error --with-ld-opt= --add-module=/usr/local/lib/ruby/gems/2.3.0/gems/passenger-5.0.30/src/nginx_module
[vagrant@localhost ~]$
- 起動&停止確認
[vagrant@localhost ~]$ sudo /etc/init.d/nginx start
nginx を起動中: [ OK ]
[vagrant@localhost ~]$ nmap localhost
Starting Nmap 5.51 ( http://nmap.org ) at 2016-12-18 09:40 UTC
Nmap scan report for localhost (127.0.0.1)
Host is up (0.00017s latency).
Other addresses for localhost (not scanned): 127.0.0.1
Not shown: 996 closed ports
PORT STATE SERVICE
22/tcp open ssh
25/tcp open smtp
80/tcp open http
111/tcp open rpcbind
Nmap done: 1 IP address (1 host up) scanned in 0.09 seconds
[vagrant@localhost ~]$ sudo /etc/init.d/nginx stop
nginx を停止中: [ OK ]
[vagrant@localhost ~]$ nmap localhost
Starting Nmap 5.51 ( http://nmap.org ) at 2016-12-18 09:40 UTC
Nmap scan report for localhost (127.0.0.1)
Host is up (0.00031s latency).
Other addresses for localhost (not scanned): 127.0.0.1
Not shown: 997 closed ports
PORT STATE SERVICE
22/tcp open ssh
25/tcp open smtp
111/tcp open rpcbind
Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds
[vagrant@localhost ~]$
通过浏览器访问并显示Rails应用程序
创建应用程序
cd /vagrant
rails new getwild
-
- Gemfileの編集
therubyracer のコメントアウトを外す
外しておかないとrailsアプリを動かした時にエラーになる
cd getwild
vi Gemfile
bundle install を実行
[vagrant@localhost getwild]$ bundle install
Fetching gem metadata from https://rubygems.org/..........
Fetching version metadata from https://rubygems.org/..
Fetching dependency metadata from https://rubygems.org/.
Resolving dependencies...
Using rake 12.0.0
Using concurrent-ruby 1.0.3
省略
Using rails 5.0.0.1
Using sass-rails 5.0.6
Bundle complete! 16 Gemfile dependencies, 65 gems now installed.
Use `bundle show [gemname]` to see where a bundled gem is installed.
[vagrant@localhost getwild]$
编辑nginx.conf文件
目前，将以下内容进行编辑。
#user nobody;
worker_processes 1;
error_log /var/log/nginx/error.log notice;
pid /var/log/nginx/nginx.pid;
events {
worker_connections 1024;
}
http {
include mime.types;
default_type application/octet-stream;
sendfile on;
#tcp_nopush on;
#keepalive_timeout 0;
keepalive_timeout 65;
#gzip on;
passenger_root /usr/local/lib/ruby/gems/2.3.0/gems/passenger-5.0.30;
passenger_ruby /usr/local/bin/ruby;
server {
listen 80;
server_name 192.168.33.10;
access_log /var/log/nginx/192.168.33.10.access.log;
error_log /var/log/nginx/192.168.33.10.error.log;
location / {
root /vagrant/getwild/public;
passenger_base_uri /;
passenger_enabled on;
rails_spawn_method smart;
rails_env development;
index index.html index.htm;
}
#error_page 404 /404.html;
# redirect server error pages to the static page /50x.html
#
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root html;
}
}
# another virtual host using mix of IP-, name-, and port-based configuration
#
#server {
# listen 8000;
# listen somename:8080;
# server_name somename alias another.alias;
# location / {
# root html;
# index index.html index.htm;
# }
#}
# HTTPS server
#
#server {
# listen 443 ssl;
# server_name localhost;
# ssl_certificate cert.pem;
# ssl_certificate_key cert.key;
# ssl_session_cache shared:SSL:1m;
# ssl_session_timeout 5m;
# ssl_ciphers HIGH:!aNULL:!MD5;
# ssl_prefer_server_ciphers on;
# location / {
# root html;
# index index.html index.htm;
# }
#}
}
编辑iptables
使得可以访问80端口。
- 確認
sudo /sbin/iptables -L --line-numbers
[vagrant@localhost ~]$ sudo /sbin/iptables -L --line-numbers
Chain INPUT (policy ACCEPT)
num target prot opt source destination
1 ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED
2 ACCEPT icmp -- anywhere anywhere
3 ACCEPT all -- anywhere anywhere
4 ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh
5 REJECT all -- anywhere anywhere reject-with icmp-host-prohibited
Chain FORWARD (policy ACCEPT)
num target prot opt source destination
1 REJECT all -- anywhere anywhere reject-with icmp-host-prohibited
Chain OUTPUT (policy ACCEPT)
num target prot opt source destination
[vagrant@localhost ~]$
- 80番を開ける
sudo /sbin/iptables -I INPUT 5 -p tcp -m tcp --dport 80 -j ACCEPT
- 保存
sudo service iptables save
[vagrant@localhost ~]$ sudo service iptables save
iptables: Saving firewall rules to /etc/sysconfig/iptables:[ OK ]
[vagrant@localhost ~]$
- 再確認
[vagrant@localhost ~]$ sudo /sbin/iptables -L --line-numbers
Chain INPUT (policy ACCEPT)
num target prot opt source destination
1 ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED
2 ACCEPT icmp -- anywhere anywhere
3 ACCEPT all -- anywhere anywhere
4 ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh
5 ACCEPT tcp -- anywhere anywhere tcp dpt:http
6 REJECT all -- anywhere anywhere reject-with icmp-host-prohibited
Chain FORWARD (policy ACCEPT)
num target prot opt source destination
1 REJECT all -- anywhere anywhere reject-with icmp-host-prohibited
Chain OUTPUT (policy ACCEPT)
num target prot opt source destination
[vagrant@localhost ~]$
通过浏览器访问
通过访问以下环境，可以连接到vagrant上的应用程序。
请用中文原生方式重新表达以下内容，只需要一种选项：
http://192.168.33.10/
我建立了一个运行Rails应用程序的环境。
