创建这个页面的原因

由于我们在管理鲭运营过程中总是忘记（因为这是初始设置），所以我只是做了个备忘录。

可能有些人认为这项工作是多余的，因为这只是我个人实践的经验。

要紧

这个页面尚未完成。
我建议在这个标记消失之前不要参考它。

打开端口（共5种）

只需使用一种汉语方式：将25565分配给BungeeCord服务器是为了不需要在进入服务器时使用IP:Port的形式。

BungeeCord服务器准备完成。

※假设已经下载完成。

配置文件.yml（初始版本）

forge_support: false
player_limit: -1
permissions:
  default:
  - bungeecord.command.server
  - bungeecord.command.list
  admin:
  - bungeecord.command.alert
  - bungeecord.command.end
  - bungeecord.command.ip
  - bungeecord.command.reload
timeout: 30000
log_commands: false
online_mode: true
disabled_commands:
- disabledcommandhere
servers:
  lobby:
    motd: '&1Just another BungeeCord - Forced Host'
    address: localhost:25565
    restricted: false
listeners:
- query_port: 25577
  motd: '&1Another Bungee server'
  tab_list: GLOBAL_PING
  query_enabled: false
  proxy_protocol: false
  forced_hosts:
    pvp.md-5.net: pvp
  ping_passthrough: false
  priorities:
  - lobby
  bind_local_address: true
  host: 0.0.0.0:25577
  max_players: 1
  tab_size: 60
  force_default_server: false
ip_forward: false
network_compression_threshold: 256
prevent_proxy_connections: false
groups:
  md_5:
  - admin
connection_throttle: 4000
stats: 25e4c7af-20e1-4c5b-82c6-3397aadd0a4b
connection_throttle_limit: 3
log_pings: true

第一变更点

servers:
  lobby: # 鯖Aをあらわす文字（任意）
    motd: '&1Just another BungeeCord - Forced Host'
    address: localhost:0000 # 鯖A
    restricted: false

第二个变更项

listeners:
- query_port: 25565 # portを25565にした
  motd: '&1Another Bungee server' # 25565で入ろうとするとこのMOTDが見えるわけ
  tab_list: GLOBAL_PING
  query_enabled: false
  proxy_protocol: false
  forced_hosts:
    pvp.md-5.net: pvp
  ping_passthrough: false
  priorities:
  - lobby # worldが増えたら増えていく
  bind_local_address: true
  host: 0.0.0.0:25565 # portを25565にした
  max_players: 1 # 鯖入口にはプレイヤーが滞在しないので1でOK
  tab_size: 60
  force_default_server: false

鯖A的Votifier配置檔案.yml

# The IP to listen to. Use 0.0.0.0 if you wish to listen to all interfaces on your server. (All IP addresses)
# This defaults to the IP you have configured your server to listen on, or 0.0.0.0 if you have not configured this.
host: 0.0.0.0

# Port to listen for new votes on
port: 0000 # 投票 | Paper

# Whether or not to print debug messages. In a production system, this should be set to false.
# This is useful when initially setting up NuVotifier to ensure votes are being delivered.
debug: false

# Setting this option to true will disable handling of Protocol v1 packets. While the old protocol is not secure, this
# option is currently not recommended as most voting sites only support the old protocol at present. However, if you are
# using NuVotifier's proxy forwarding mechanism, enabling this option will increase your server's security.
disable-v1-protocol: false

# All tokens, labeled by the serviceName of each server list.
tokens:
  # Default token for all server lists, if another isn't supplied.
  default: TOKEN # ここ重要

# Configuration section for all vote forwarding to NuVotifier
forwarding:
  # Sets whether to set up a remote method for fowarding. Supported methods:
  # - none - Does not set up a forwarding method.
  # - pluginMessaging - Sets up plugin messaging
  method: none
  pluginMessaging:
    channel: NuVotifier

橡筋投票者配置文件config.yml

# The IP to listen to. Use 0.0.0.0 if you wish to listen to all interfaces on your server. (All IP addresses)
# This defaults to the IP you have configured your server to listen on, or 0.0.0.0 if you have not configured this.
host: 0.0.0.0

# Port to listen for new votes on
port: 0000 # 投票 | BungeeCord

# Whether or not to print debug messages. In a production system, this should be set to false.
# This is useful when initially setting up NuVotifier to ensure votes are being delivered.
debug: false

# All tokens, labeled by the serviceName of each server list.
tokens:
  # Default token for all server lists, if another isn't supplied.
  default: ??????????????????? # ここ無視してどうぞ

# Setting this option to true will disable handling of Protocol v1 packets. While the old protocol is not secure, this
# option is currently not recommended as most voting sites only support the old protocol at present.
disable-v1-protocol: false

# Configuration section for all vote forwarding to NuVotifier
forwarding:
  # Sets whether to set up a remote method for fowarding. Supported methods:
  # - none - Does not set up a forwarding method.
  # - pluginMessaging - Sets up plugin messaging.
  # - proxy - Proxies votes to other NuVotifier servers from this server.
  method: proxy
  pluginMessaging:
    channel: NuVotifier

    #Only send votes to certain servers. If a server is present on excludedServers, then votes will NOT be forwarded
    #to them. If excludedServers is not present, votes will be sent to all servers.
    #If onlySendToJoinedServer is true, this option is ignored.

    #excludedServers:
    #- server1
    #- server2


    # Sets which cache to use if there are no players on the server that the vote is being sent to. Supported caches:
    # - none - Votes will simply be lost when no players are present on the server.
    # - memory - Votes will be cached in memory when no players are present. When Bungee is restarted, the votes will be lost.
    #   This method is NOT recommended for production systems!
    # - file - Votes will be saved to a local file every 3 minutes and on shutdown and reloaded when Bungee is restarted. This is suitable for
    #   most set ups.
    cache: file
    # Only sends the vote to the server in which the player is currently joined.
    onlySendToJoinedServer: false
    #Sets which server to send the vote in the event the player is not online when the vote is cast
    #If you do not want the vote forwarded to a fallback, set this value to empty ('')
    #ONLY USED IF onlySendToJoinedServer is true!!
    joinedServerFallback: 'Hub'
    # Options for file caching.
    file:
      name: cached-votes.json
      # days before a vote is considered 'dead' - removed from cache with a console warning
      voteTTL: 10
  # Specify servers to proxy votes for.
  proxy:
    Hub:
      address: 0.0.0.0
      port: 0000
      token: TOKEN